Elektrogas Brand VMR Model Safety Solenoid Valve For Air And Gas
VMR VMR60Safety solenoid valves for air and gas, fast opening and
fast closing type
The Italy Elektrogas VMR type valve is a fast opening solenoid
valve that is normally closed.
When the coil is not energized the spring works on the disc keeping
the gas passage closed. When the coil is powered the valve opens.
When power is switched off the valve rapidly shuts.
This type of device is suitable for gas and air blocking and
adjusting controls in atmospheric burners or fan-assisted burners,
in industrial kilns and in all gas equipments which use gas
solenoid valves (qualified for continuous service – 100% ED).
Suitable for high-frequency switching systems.
VMR Model fast opening solenoid valve is normally installed as safety and
regulating device in gas trains, for industrial applications and
gas firing systems.
| Connections | Internal threaded ISO 7-1 from Rp1/4 to Rp2½ or
ANSI-ASME B1.20 from 1/4"NPT to 2"½ NPT
Flanged ISO 7005 PN16 from DN40 to DN150 or
ANSI-ASA-ASME B16.5 class 150 from 2” to 6” |
| Voltage Ratings | 230 VAC 50/60 Hz
120 VAC 50/60 Hz
110 VAC 50/60 Hz
24 VAC/DC
12 VAC/DC |
| Max. Operating Pressure | 200 mbar (3 psig)
360 mbar (5 psig)
500 mbar (7 psig)
6 bar * (90 psig) |
| Body Test Pressure | 1 bar (15 psig)
9 bar * (130 psig) |
| Closing Time | < 1 second |
| Opening Time | < 1 second |
| Gas strainer | 600 μm (0.02 in)
(except brass models and 6 bar) |
| Enclosure | IP54 (NEMA 3)
optional IP65 with cable (NEMA 4) |
Description
The VMR type valve is a fast opening single-stage solenoid valve,
normally closed (open when energized). This type of device is
suitable for air or gas blocking and releasing controls, required
in gas power burners, atmospheric gas boilers, industrial kilns and
others gas consuming appliances.
Features
Elektrogas Solenoid Valves are made of aluminum alloy die-cast (or
hot-pressed brass for OTN versions), with a wide range for
inlet/outlet connections from DN 8 (1/4”) up to DN 150 (6”).
Sealings are made of NBR-based rubber certified for use with gas
(EN 549).
Suitable for use with air and non-aggressive gases included in the
1, 2 and 3 families (EN 437).
Special versions suitable for aggressive gases, free of non-ferrous
metals and with FPM seals.
Pipe connections meet Group 2 and backpressure sealing is compliant
with Class A, according to EN161 requirements.
The whole range can be provided in Ex-proof execution, for use in
Zones 2 and 22, according to 2014/34/EU Directive (ATEX).
The valve is open only when energized: if, for any reason, power
supply goes down, the valve closes immediately (intrinsic safe).
Suitable for heavy-duty cycle operation and qualified for
continuous service (100% ED).
Equipped with flow rate adjustment (except brass models).
An incorporated fine mesh filter protects the valve seat and disc
as well as downstream components and prevents dirty contamination
(except brass models and 6 bar).
Provided with G1/8 connection to fit a proof of closure switch or a
visual indicator.
Provided with 1/4" pressure gauge on two sides in the inlet chamber
(except brass models), to
connect manometers, pressure switches, leakage detectors or other
gas equipments. Flanged models are provided with gauges also in the
outlet chamber.
The coils are provided with terminal box or with ISO 4400 plug.
Both systems are provided with suitable cable gland to avoid water
and dirty contamination.
All components are designed to withstand any mechanical, chemical
and thermal condition occurring during typical service. Effective
impregnation and surface treatments have been used to improve
mechanical sturdiness, sealing and resistance to corrosion of the
components.
Elektrogas Solenoid Valves are 100% tested by computerized testing
machineries and are fully warranted.
